BreadBee tiny Linux development board

BreadBee tiny Linux development board

A new small form factor Linux development board called the BreadBee will be launching via the Crowd Supply website in the near future offering a ARM Cortex A7 development board based on a relatively unknown IP camera SoC, the MSC313E, from a company called MStar. Measuring just 32 mm x 30 mm the tiny embedded Linux development board can be mounted vertically in a standard breadboard with a small adapter socket.

BreadBee tiny Linux development board

BreadBee tiny Linux development board

Inspiration for the Linux development board has been fuelled by the following :

– Networked microcontrollers are a disaster waiting to happen; Many solutions – even commercial ones – use LWIP as the TCP/IP stack with no intention of actually maintaining it, use relatively unknown TLS libraries because of lack of memory, have no memory protection, no isolation between the moving parts.

– There are no solutions yet that can run a real OS like Linux that can be integrated by hobbyists into boards from cheap PCB vendors that don’t have show stopping limitations. I.e. the AllWinner V3s is very similar to the SoC used here but it only has one SPI controller that is lost as soon as you put SPI NOR on it. The MSC313E has just enough of the usual microcontroller peripherals to make it useful, comes in a (relatively) easy to work with QFN package, is tiny and costs ~$4. It is a bit harder to integrate into your designs than a microcontroller that requires a single power supply but all of the information you would need to do so is right here. The schematic for the breadbee is incredibly simple.

– There are single board computers out there that have more cores, more memory etc and are still around $10 but they are over kill for applications where even an ESP32 has enough horse power and they aren’t usually something you can integrate into your project without reserving considerable space.

– Why not? The MSC313E is a Cortex-A so getting Linux running from scratch was relatively simple. The peripherals are super weird in places but not totally insane.

Features of the BreadBee development board.

– ARM Cortex A7 @ ~1GHz
– 64MB DDR2
– 16MB SPI-NOR flash
– 100Mb Ethernet
– USB2
– SD/SDIO
– SPI
– I2C
– ADC
– UART

To register your interest and be informed when the BreadBee development board is made available via Crowd Supply jump over to the official project page to enter your email address.

Source : Crowd Supply

Filed Under: DIY Projects, Hardware, Top News

LEAVE A REPLY

Please enter your comment!
Please enter your name here